Protected Setup Pages - AMX Modero Viewpoint MVP-5200i Operation/Reference Manual

Protected Setup Pages

The Protected Setup page (FIG. 56) provides secured access to advanced panel configuration options,
including communication and security settings. The Protected Setup page is accessed through the Setup
page (please refer to the Setup Pages section on page 51).
To access the Protected Setup pages:
1. Press the center button of the navigation wheel and hold for 3 to 5 seconds to access the Setup
pages.
2. Select the Protected Setup button on the left side of the screen.
3. Enter the factory default password (1988) into the password keypad to access the page.
FIG. 56 Protected Setup page showing default values
Features on the Protected Setup page include:
Protected Setup Page
Navigation Buttons:
Back:
Connection Status icon:
Device Number:
Options:
MVP-5200i Modero Viewpoint Widescreen Touch Panel
The buttons along on the left side of the page provide access to secondary
Protected Setup pages (see following sections).
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Protected Setup page provides a
constant visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Opens a keypad used to view or change the device number of the panel.
• Function Show - toggles the display of the channel port, channel code, level
port and level code on all touch panel buttons (see FIG. 57).
• Telnet - enables or disables the panel's telnet server, allowing or preventing
direct telnet communication to the panel.
• Page Tracking - toggles the page tracking function. When enabled, the panel
reports page data to the NetLinx Master.
• Front Button Setup Access - activates the navigation wheel for accessing
the Setup and Calibration pages (see FIG. 56 on page 61). The default
setting is On.
Protected Setup Pages
61