Page 1
MY 575w USER MANUAL (V2.05) [From Serial number ele632sp008]...
Page 2
Thank you for choosing MY575w. When you unpack MY575w, there should be in the box the fixture, a power cable, a DMX XLR cable, a safety cable and a CD. Please check carefully that there is no damage caused in shipping. If you notice any damage then immediately let your shipper know and the dealer from whom you purchased MY575w.
MY575w should not be operated 24/7 (24 hours a day; 7 days a week). MY575w needs operation breaks to ensure that it will work for a long time without problems. Please do not shake MY575w and avoid using brute force when installing or operating it.
Do not ever operate MY575w with the cover open. The lamp is a discharge lamp. All discharge lamps, irregardless of the manufacturer or type, are very volatile and can explode. Great caution must be exercised when working with these lamps otherwise serious injury can happen.
Page 5
Mounting MY575w The installation of MY575w has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any deformation. The installation must always be secured with a secondary safety device (a safety cable).
Note: After switching on, MY575w will automatically detect whether DMX 512 data is received or not. If the data is received, the display will show "A.001" or whatever the address is set to, like “A.019” If there is no data received at the DMX-input, the display flashes "A001" with the actually set address.
The Display Panel offers several features: you can set the starting address, switch on and off the lamp, run the pre-programmed program or make a reset. It has been updated so if you have earlier my575w beware of the changes! These updates are a direct result of customer feedback.
Page 8
Default settings shaded. Main Sub menu Extension Display Function menu VALU A001~A511 (AXXX) DMX address setting ADDR SLAV ON/OFF (SLAV) Slave setting Automatic Program Run ALON (AU-A) in Stand Alone mode AUTO Automatic Program Run MAST (AU-M) as Master Sound-controlled Program MODE ALON (SO-A)
Main functions - Main menu 0 1. Press [ENTER] for 3 seconds to enter the main menu "MODE" (display flashing) 2. Press [ENTER] and select "ADDR", “RUN” or "DISP" by pressing the [UP] button. 3. Press [ENTER] to select the desired sub menu. - DMX address setting, Slave setting - DMX address setting With this function, you can adjust the desired DMX-address via the Display Panel.
Page 10
Select "AUTO" or "SOUN" by pressing [UP]. Press [ENTER] for selecting the desired extension menu. Select "ALON" or "MAST" by pressing [UP]. Press [ENTER] to confirm. Press [EXIT/DN] to return to the main menu. - Display the DMX-value, Reverse display, Shut off LED display - Display the DMX 512 value of each channel With this function you can display the DMX 512 value of each channel.
Page 11
- Main menu 1 1. Press [ENTER] for 3 seconds to enter the main menu (display flashing). 2. Press [UP] to select “LAMP”. - Lamp on/off With this function you can switch the lamp on or off via the Display Panel. Select "OPEN"...
Page 12
- Main menu 2 1. Press [ENTER] for 3 seconds to enter the main menu (display flashing). 2. Press [UP] to select “SET”. - Pan Reverse With this function you can reverse the Pan-movement. Select “rPAN” by pressing [UP] button. Press [ENTER], the display shows “ON”...
Page 13
Press [ENTER] to confirm. Press [EXIT/DN] in order to return to the main menu. - Software version With this function you can display the software version of MY575. Select “VER” by pressing [UP] button. Press [ENTER], the display shows “V-X.X”, “X.X“ stands for the version number, e.g. “V-1.0”, “V-2.6”.
Page 14
- Main menu 4 1. Press [ENTER] for 3 seconds to enter the main menu (display flashing). 2. Press [UP] to select “TIME”. - Fixture running time With this function you can display the running time of MY575. Select “MATI” by pressing [UP] button. Press [ENTER], the display shows “XXXX”, “X“...
Page 15
[UP]. 6. Press [ENTER] to enter editing for the selected channel , MY575w reacts to your settings. The display shows the DMX value of the edited channel. Such as “ 11XX”, it stands for in the channel 11 of the editing scene, the DMX value is XX , XX is a hexadecimal number value “01-FF”.
Page 16
Editing via an Elektralite CP20 or other DMX controller Call up the first scene in your controller now. 1. Select “SC01” by pressing [UP] button. 2. Press [ENTER], the display shows “SC01”. 3. Press [ENTER], the display shows “C-01”.
Channel Functions: CHANNEL 1 : Color wheel with 5 colors plus white and also 2 x color correction filters. Complete with color cycle or rainbow effect CHANNEL 2 : Cyan (0 – 100%) CHANNEL 3 : Magenta (0 – 100%) CHANNEL 4 : Yellow (0 –...
Page 18
Channel 6 - TILT movement 8bit Coarse Channel 7 - Speed pan/tilt movement 0-14 max speed 15-225 max to min speed 226-235 max speed and black out by color changes or PAN/TILT moving 236-245 max speed and black out by while color change 246-255 no function Channel 8 - Effect wheel 0-70...
ERROR MESSAGE When you turn on MY575w, it will make a reset first. The display may show “XXer” while there are problems with one or more channels. “XX” stands for channel 1,2,3,4,5,6,8,12,14,15 who has the testing sensor for positioning .
Be particular to check the fans and their vents. That is where dust and debris can accumulate. Accumulation of dust here can have a devastating effect on MY575w. You must remove it regularly. Failure to do so will cause overheating inside MY575w. Overheating causes premature failure of the lamp and other critical components.
Page 22
Other Elektralite Products include : [Also check out our website at www.myelektralite.com] CP-3 Controller. CP-10xt Controller. CP-16 /24 Controller. - 21 - MY575 WASH...