Tascam M-200 Series Owner's Manual page 33

PERFORMANCE CHARACTERISTICS
Equivalent Input Noise UNWTD (20
-
20 kHz)/
IHF A WTD
150 ohm source -1 28 dB/-130 dB
Signal-to-Noise Ratio
Input
-
Output UNW'TD (20
-
20 kHz)/
IHF A WTD
8 Mic
-
PGM 60 d B/62 d B
1 Line
-
PGM
81 dB183 dB
8 Line - PGM 72 d B/74 d B
1 Line
-
EffectIFoldback 80 dB/82 dB
1 Line
-
Stereo
80 dB/81 dB
1 Tape
-
PGM
83 d Bl84 d B
Total Harmonic Distortion (THD)
1 Mic t o 1 PGM Outputl.
3)
0.03 %, 20 Hz - 20 kHz
1 Line to 1 PGM Output2.3) 0.025 %, 20 Hz -20 kHz
Intermodulation Distortion (IMD)
1 Mic t o 1 PGM Outputl, 3) 0.06 %, SMPTE
1 Line t o 1 PGM Output2, 3) 0.045 %, SMPTE
Frequency Response
Any Input t o Any Output 20 Hz - 25 kHz
: E
norninal level
Cross-Talk (1 kHz) Better than 60 dB
Dirnensions (W
x
H
x
D) 442 x 132 x 425 mm
(
17-318" x 5-311 6" x
16-314")
Weight 8.5 kg (1 8-1211 6 Ibs.) net
1) Level for measurement - 50 dB above norninal with
Pad engaged; EQ off.
2) Nominal input level used for measurernent; EQ off.
3 ) 30 kHz Low Pass Filter connected during test.
In these specifications: O dBV is referenced to 1 .O Volt;
O dBu is referenced to 0.775 Volt. Actual voltage
levels are also given in parenthesis (0.316 Volt for
-10 dBV is rounded of and given as 0.3 Volt, and
0.775 Volt for O dBu as 0.8 Volt).
Changes in specifications and features may be made
without notice or obligation.