Tascam M-200 Series Owner's Manual page 26

FOLDBACK MIX
@
FLB Controls
These rotary controls are present in each of
the input channels fo your mixer. I t controls
the amount of signal that will be passed on to
the MASTER FLB control. These controls are
used to create the foldback mix in the same
manner as your input channel faders are used
to create the main mix. A foldback mix is used
as a control room monitor mix, or cue mix in
the recording process. I t may be used as a stage
monitor mix for sound reinforcement.
@ TAPE Select Switch (# 2)
This switch determines whether the foldback
system will take its signal from the TAPE IN-
puts or MICILINE INputs. I t is located below
the FLB control. The foldback mix originates
after the EQ section and prior to the Input
Fader. The Input Fader, therefore, has no affect
on the Foldback signal.
@ MASTER FLB Control
This is the final control in the foldback mix
system. I t controls the level of the signals from
al1 your input channels that will be available
a t
the FLB OUTPUT and FLB button in the
MONITOR section.
@FLB OUTPUT
This output may be connected t o an amplifier
to drive stage monitor or control room monitor
speakers. I t may also be connected to a MH-406
Headphone Amp fora talent cue mix.