Dynamic Post-Processing Software; Software Start-Up & Operation Brief; Main Menu & Function Introduction - Horizon Fitness KRONOS100 Operation Manual

4.4 Dynamic post-processing software

4.4.1 Software start-up & operation brief
1. main features of software includes:
English Windows interface

Edit function: switch the format of file data, output the coordinates report( requires to

input the meridian and one known point within coverage), define the coordinate
system ( parameter of ellipsoid and Meridian)
Compatible with CAD, calculation including sides and area.

Easy-operation only needs three steps:

Step 1: Add KRONOS100 base data and KRONOS100 rover data
Step 2: Input the local parameter and the known point restriction post-processing
Step 3: Edit and print report
Output the coordinate file documents directly

The coordinate data can be switched its format to imported into GIS as geography data

Compiled by Visual C++, which calculates at a high speed.

2. Software use introduction
Basic steps:
New job

Fill in each item in the dialog box, especially must select the coordinate system and
projection zone
Add observation data

Import the KRONOS100 Base and Rover data of *.DAT to the software at the same time
Post differential processing

Input the known coordinate value of Base, get the report after real-time processing
Report output

The purpose of this step is to import the report into other software, such as CAD, MAPINFO
and so on, in order to proceed more convenient editing and mapping.
4.4.2 Main menu & function introduction
1. Functions of the software
The software using differential GPS collecting data, adopts the pseudo-range differential
principle to calculate the position coordinate of the discrete points and close the coverage in
order to calculate the area of the coverage.
2. Main menu and function introduction
1. Post differential processing
Processing menu
Fig 4-10 Post differential menu
28