Operation Modes - SCUBAPRO-UWATEC Chromis User Manual

Starting a dive when the battery symbol is
blinking can cause the computer to fail during
the dive! Replace the battery before any diving
activity if the blinking battery symbol appears.
When the 'do not dive symbol' appears with
the battery symbol Chromis can not be used
for diving before a fresh battery is replaced.
Please refer to chapter Checking the
battery status for details how to manually
trigger the battery level check.
Replacing the battery requires opening the
electronic compartment of Chromis. You must
take extreme care when performing the battery
change operation in order to ensure the water
tightness of the watch. Failing to do so will
cause the watch to fl ood during your next dive
and permanently ruin it. Damage to Chromis
due to an improper battery replacement is not
covered by warranty. We strongly recommend
having the battery change operation be carried
out by your SCUBAPRO dive retailer.
See chapter Replacing the battery in this
manual for information on how to replace
the battery.
CHROMIS USER MANUAL
WARNING
WARNING
2.

OPERATION MODES

The reference point for any description
of Chromis as a watch is the main time of
day display. This is the display in which the
current time is shown on the middle row. The
upper row shows the date and the bottom
row indicates the weekday. The example
below shows Saturday, 23th of November
and the time is one second past 10 o'clock.
If dual time is activated, this display shows
dual time on the top row, the main time on
the middle row and the date on the bottom
row.
The different modes are shown on the
right side of the computer and the current
functioning mode is indicated with a dot.
Each mode may have sub functions and
menus.
The modes are grouped and described in
this manual in three chapters:
1. Chromis as a watch
2. Menus and functions at the surface
3. Chromis as a dive computer
The following chart describes the main
menu structure.
7