Gas Settings; Set Gas - SCUBAPRO-UWATEC Chromis User Manual

The remaining nitrogen loading is shown in
this display with the indicator on the right by
starting from the fi rst bar segment with N
4.2

Gas settings

GAS
+/UP
CHROMIS USER MANUAL
-/DOWN
SEL
ESC

SET GAS

-/DOWN
+/UP
ESC
Nitrox reset
-/DOWN
+/UP
ESC
Desat reset
4.2.1 Set gas
You may use your Chromis with all Nitrox
.
2
mixes from Air to pure oxygen.
By pressing the SEL button in this display
the oxygen content of the Gas starts
blinking. By pressing +/- buttons you may
scroll the value from 21 up to 100%.
By pressing SEL the content is confi rmed
and the ppO starts blinking. By pressing +
2
or - buttons you may select the value from
1.00 bar (1.00 bar to 1.30 bar, depending
on the %O2 in the gas mix) up to 1.60 bar.
It is possible to disable the MOD setting
(«---» displayed at the middle row), but this
requires the security code 313 from the
user. By pressing the SEL button the user
will accept the given value.
21