Surface Interval Counter - SCUBAPRO-UWATEC Chromis User Manual

DIVE mode
+/UP
When you have not been diving with your
Chromis for a while (no desaturation time
left) the dive mode may appear as shown
below, actual day time running at the middle
row:
20
-/DOWN
SEL
ESC
INTERVAL
-/DOWN
+/UP
ESC
SET GAS
-/DOWN
+/UP
ESC
SET SCUBA
-/DOWN
+/UP
ESC
SET APNEA
-/DOWN
+/UP
ESC
SET SWIM
-/DOWN
+/UP
ESC
SET ALGO
However in SCUBA mode after a dive, the
display may appear as shown below:
- Suface interval time at top row
- Remaining desaturationtime at middle row
From here, by pressing the SEL button
and scrolling with the + or - buttons, you
access to a loop of menus which are all
related to diving.
4.1.2

Surface interval counter

After a dive the Chromis shows the surface
interval from the latest dive. The surface
interval counter counts until desaturation
is complete. After the desaturation is
complete this menu disappears.
The no fl y time is indicated with the symbol
at the top and is shown in hours until this
restriction is completed.
CHROMIS USER MANUAL