Optional Brick Liner Installation Instructions - Empire Comfort Systems VFH-33M-1 Installation Instructions And Owner's Manual

OPTIONAL BRICK LINER INSTALLATION INSTRUCTIONS

INSTALLING OPTIONAL BRICK LINER EHL-1.
1. Remove screen assembly from fireplace (2 screws).
2. Remove logs from burner assembly.
3. Insert rear brick liner and (2) side brick liners onto 1"
bottom flanges of the inner casing. You must insert rear
brick liner before inserting the (2) side brick liners.
4. Place the (2) 17 3/4" liner mounting brackets over the front
edges of the (2) side brick liners. Attach liner mounting
brackets to outer casing with (4) four #10 x 1/2" screws
provided in optional brick liner kit.
5. Place the Z-shaped liner mounting brackets at the top of the
brick liners and align the Z-shaped liner mounting brackets
with screw holes in the inner casing. Use (1) liner mounting
bracket for each side brick liner and use (2) liner mounting
brackets for the rear brick liner. Attach the (4) Z-shaped
liner mounting brackets to inner casing with (4) four #10 x
1/2" screws provided in optional brick liner kit.
6. Replace logs onto pins on burner assembly.
7. Attach screen assembly to fireplace with (2) screws removed
in Step 1.
8. Installation of EHL-1 optional brick liner is completed.
Page 26
EHL-1 for Unvented Gas Fireplace
Model VFH-33M, VFH-33R, VFH-33T
PARTS LIST FOR EHL-1, BRICK LINER KIT
Index Part
No. Number Description
1 SR-178 Liner Mounting Bracket - Rear .
4 Required
2 R-2802 Brick Liner - Side, 2 Required
3 EL-040 Liner Mounting Bracket - Front,
2 Required
4 R-2803 Brick Liner - Rear
VFH-33