Oce 7050 User Manual page 21

Set the desired length of the trailing edge with the trailing edge buttons, for
2
example -40 (see figure 12).
The trailing edge can vary +40 to -100 mm in steps of 5 mm).
Note:
Océ 7051
[12] Trailing edge buttons
Press the '-' button to shift the image towards the leading edge.
3
Press the '+' button to shift the image towards the trailing edge.
4
Be aware that when shifting the image too much, this may result
Attention:
in the loss of information at the edge that the image was shifted to. In this
situation longer copy material is necessary.
Copy jobs
- +
trailing edge
original length
21