Table of Contents
Advertisement
Making copies using manual roll (optional)
Press the copy material selection button to toggle between paper or film.
1
Select the appropriate copy material to avoid flawed copies. All
Attention:
materials (except for film) should be copied with the copy material
selection set to 'paper'. Only select the setting 'film' if you make copies on
polyester film
Océ 7051 only: Select the desired number of copies by pressing the '+' or '-'
2
button on the operating panel (see figure 5).
Changing the copy quantity can be done at all times. When you make a
Note:
mistake you simply press the correction button to correct the copy quantity.
Océ 7051
add toner
paperpath
-
[5] Setting more than one copy using the '+' or '-' button
Feed the original centrally and face down into the original feed table in
3
accordance with the guidelines (see figure 6 on page 16).
The original is aligned in the nip of the rollers. By inserting the material
Note:
with an amount of slack, the leading edge is aligned in the nip. A delay between
insertion of the material and the start of the transport ensures proper
alignment.
Copy jobs
2
4
darker
C
correction
+
stop
15
Hide quick links:
Advertisement
Table of Contents
