Shock Sensor Harness, 4-Pin Connector - Avital 5103 Installation Manual

Shock sensor harness, 4-pin connector

H GREEN
Inputs shorter than 0.8 seconds will trigger the Warn Away® response, while
inputs longer than 0.8 seconds will trigger full alarm sequence and report Zone
4. If installing an optional Directed Electronics dual stage sensor, connect to the
green wire as shown below.
Blue and Green wires from
Directed dual stage sensor
H BLUE
Inputs shorter than 0.8 seconds will trigger the Warn Away® response, while
inputs longer than 0.8 seconds will trigger full alarm sequence and will also
report Zone Two.
H RED
Do not use for anything besides the plug-in shock sensor.
H BLACK
Do not use for anything besides the plug-in shock sensor
32
(-) MULTIPLEX INPUT, ZONE 4
Green Mux Input
(-) MULTIPLEX INPUT, ZONE 2
(+) 12V CONSTANT
(-) GROUND
© 2009 Directed Electronics. All rights reserved.
AVISTART 5103