Table of Contents
Advertisement
Content
Features and functions
Operating environment
Technical features and parameters
This chapter describes features and functions of NETCOM POE series
1.1 Features and functions
NETCOM POE which is designed specifically for Telecom carrier . The
device implemented advanced MCU control technology. Total power,
individual port power, port status and device temperature are displayed on LCD
real time. And it has efficient protection of each port. It is used with wireless
AP, IP cameras, VOIP and other device that needs network and power supply.
1. LCD display and control panel, display the total power, power of each port,
the device temperature, etc. ( only for 8 port POE)
2. The entire device or any single port reset ( only for 8 port POE)
3. The POE and UPLINK port support automatic MDI/MDI-X function
4. Supply 4 or 8 POE power port, one UPLINK port
5. 10/100Mbps, full/half duplex automatic adapt
6. Compliant with IEEE802.3af, IEEE802.3at standard, 25W Max per port
7. Backplane switching capacity of 1.0Gbps
8. 2K MAC address list
4
Chapter 1
System Overview
Advertisement
Table of Contents
