SHOWTEC Scanmaster 1 User Manual page 26

2. Operation Guide
2.4.2 Auto Mode
BANK
0.1SEC
10MIN
SPEED
Auto/Del
23
2. Use the Bank Up/Down button to select a bank
3. After selecting the bank of scenes you wish to
30S
0
FADE TIME
4. Tap the Auto/Del button again to exit Auto mode.
of scenes to run.
run, you can use the Speed slider(or Tap Sync/
Display button) and Fade Time slider to adjust
the scenes to your desired effect.
Hints:
The Tap Sync button is used to set the speed by
tapping the button several times, the last two taps
will define the speed with a maximum of 10 minutes.
Tap Sync will override any previous setting of the
Speed slider unless the slidern is moved again.