Running Scenes; Manual Mode; Auto Mode - SHOWTEC Scanmaster 1 User Manual

2. Operation Guide

2.4 Running Scenes

2.4.1 Manual Mode

1. When the power is turned on, this unit enters Manual mode automatically.
2. Make sure Auto trigger and Music trigger indicators in the Segment Display are
both off.
3. Use the Bank Up/Down button to select the bank that contains the scenes you
wish to run.
SCENE

2.4.2 Auto Mode

Auto/Del
4. Tap the Scene button to select the scene
to run.
This function allows you to run a bank of programmed
scenes in a sequential loop.
1. Tap the Auto/Del button to activate Auto mode.
A highlight next to "Auto trigger" will indicate
Auto mode.
22