Delete A Scene; Delete All Scenes - SHOWTEC Scanmaster 1 User Manual

2. Operation Guide

2.2.4 Delete a Scene

SCENE
Auto/Del

2.2.5 Delete all Scenes

Program
BANK
15
1. Tap the desired Scene button to select the scene
2. Press and hold down the Auto/Del button.
SCENE
This function will reset all DMX channel to 0 output.
1. With the power off, press and hold down the
2. Apply power again, all scenes should be cleared.
you wish to delete.
While holding down the Auto/Del button, tap
the Scene button that stores the scene you
wish to delete.
When a programmed scene is deleted, all DMX
channel in this scene is set to 0.
Program and Bank Down buttons at a time.