Programming Scenes - SHOWTEC Scanmaster 1 User Manual

2. Operation Guide

2.2 Programming Scenes

Scanner 1-12
3 4
11 12
MIDI/Rec
1. Enter Program mode.
2. Press the Fixture button to turn on its fader
control, which is indicated by the lit LED.
You may select several fixtures at a time
by tapping of these Fixture buttons, so you
can assign several fixtures at a time with this
unit.
3. Create a desired scene using the faders.
The DMX value is 0 when the fader is fully
down(bottom) and 255 when it is fully up(top).
4. If necessary , you may tap the Page Select
button to control the second set of 8 DMX
channels.
5. Once the scene is satisfactory, tap the MIDI/Rec
button to program this scene into memory.
8