Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures - HP ProBook 450 G2 Maintenance And Service Manual

5 Removal and replacement procedures for
Customer Self-Repair parts
CAUTION:
supported by the Customer Self-Repair program may void your warranty. Check your warranty to determine
if Customer Self-Repair is supported in your location.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.

Component replacement procedures

NOTE: Please read and follow the procedures described here to access and replace Customer Self-Repair
parts successfully.
NOTE: Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
There are as many as 17 screws that must be removed, replaced, or loosened when servicing Customer Self-
Repair parts. Make special note of each screw size and location during removal and replacement.
42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
The Customer Self-Repair program is not available in all locations. Installing a part not
Service tag and PCID label on page 17 for details.