Removal And Replacement Procedures Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP ProBook 450 G2 Maintenance And Service Manual

4 Removal and replacement procedures
preliminary requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
● Flat-bladed screwdriver
●
Phillips P0 and P1 screwdrivers
● Torx T8 screwdriver

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.

Plastic parts

CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care
when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
Tools required 37