Optical Drive - HP ProBook 450 G2 Maintenance And Service Manual

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel, bracket, and screws.
Description
For use in HP 450 models:
DVD-ROM drive
Blu-ray ROM DVD±RW SuperMulti DL Drive
DVD±RW SuperMulti DL Drive
For use in HP 455 models:
DVD-ROM drive
DVD±RW SuperMulti DL Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove both service doors (see
Remove the optical drive:
1. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
2. Push the optical drive tab (2) to release the optical drive from the computer.
50 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 43).
Service door on page 44).
Spare part number
768470-001
768472-001
768471-001
773070-001
773071-001