PINKERTON User Manual
Programming Telephone Numbers
Note: To be able to program telephone numbers the PINKERTON
alarm must be programmed for personal dialling format.
Telephone numbers are programmed at specific addresses in the
system memory.
Addresses are:
Programming Telephone number 1
Enter
.............................. To clear the keypad
1.
........................ Your Master Code
2.
(All Zone lights will flash - waiting for a command)
........................................ To enter program mode
3.
(ON-LINE lights flashing indicates program mode)
.............................. Address for Telephone number 1
4.
(The existing telephone number, if any, will be displayed digit by digit)
5.
(If you make a mistake at this stage, press
................................... Must be entered after the number
6.
........................................ To finish current address
7.
At this stage you can enter the address of another telephone
number by repeating steps 3 to 6 or press
Note: The maximum length of any telephone number is 15 digits.
Telephone Number 1
Telephone Number 2
Temporary Telephone 112
..... Enter the Telephone number
(Maximum 15 digits)
to go back to step 3)
25
128
144
to exit program mode.