Away Mode - PINKERTON User Manual

PINKERTON User Manual
On (Away Mode)
Key
Enter the key follow by any user code followed by
to turn the alarm system ON in Away Mode. ON light will turn on to
indicate alarm is armed in Away Mode. Only Zones which are programmed
as Away Zones will be active. All user codes are allowed to arm the
PINKERTON alarm (see below).
OFF (DISARM)
Key
Enter the key follow by any code followed by
Turning the alarm OFF will also turn the sirens and strobe off and re-enable
manually isolated Zones even if the alarm system is already OFF (see page 21).
Chime Mode ON
This mode enables the selected zone to chime/beep when activated. This is
useful for door entry applications.
To turn on chime mode, press and hold the zone number until a confirmation
beep is heard. For example:.
1. Press and hold ..........To turn ON chime mode for zone 1.
2. Press and hold ..........To turn ON chime mode for zone 2.
3. Press and hold ..........To turn ON chime mode for zone 3.
4. Press and hold ..........To turn ON chime mode for zone 4. etc.
Zones 1 to 8 can be in chime mode. All or multiple zones can be in chime
mode. Chime LED on the keypad will be lit to indicate chime mode is
active.
.Chime Mode OFF
To turn off chime mode, follow the step below.
Press and hold ..........To turn OFF all chime mode.
or enter
to turn the alarm OFF.
17