Away Mode - PINKERTON User Manual

PINKERTON User Manual
AWAY mode (using Quick Away)
Your installer may have programmed the alarm system to allow abbreviated
arming. If so, turn the system ON as follows.
Enter ....................To clear the keypad
1.
Enter ...................(All Zone lights will flash - waiting for a
2.
command)
Enter ....................Arms the system in Away mode
3.
Check that the ON light turns on.
4.
(The exit beeper will sound continuously during exit delay. If the exit
beeper has been turned off by the installer, three beeps will be heard at
the end of exit delay.)
19