Models; Humidify Equipment And Connections; Pcb Breakout Jumper - Carrier Performance TP-PRH-A Installation Instructions Manual

A07052
Fig. 1 - - PCB Breakout Jumper

Models

There are programmable and non- - programmable models for all applications. They
can be configured for AC or HP, 1- - or 2- - speed compressor, and for Hybrid Heatt
installations, allowing it to be used in place of all Carrier thermostats.
Programmable Thermidistat Controls may be configured as non- - programmable if
user desires.

Humidify Equipment and Connections

The humidify output connects directly to 24VAC operated humidifiers. An isolation
relay may be required when using powered humidifiers. No other connection or
interlock is required. Any of several installer- - selectable operating modes are
available.
4