Installing The Water Dispenser Line - Samsung Refrigerator User Manual

INSTALLING THE WATER
DISPENSER LINE
A water dispenser with a fi lter is one of the helpful
features on your new refrigerator. To help promote
better health, the water fi lter removes unwanted
particles from your water. However, it does not
sterilize or destroy microorganisms. You may need
to purchase a water purifying system to do that.
The water line also connects to the ice maker.
For the ice maker to operate properly, water
pressure of 20~125 psi (138~862 kPa) is required.
If the refrigerator is installed in an area with low
water pressure (below 20 psi), you can install a
booster pump to compensate for the low pressure.
After you have connected the water line, make
sure the water storage tank inside the refrigerator is
properly fi lled. To do this, press the water dispenser
lever until the water runs from the water outlet.
• Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper
tubing and ¼" compression nut.
Connecting to the water supply line
1. First, shut off the main water
supply.
2. Locate the nearest cold water drinking line and
install the pipe clamp and shut off valve.
Cold water line Cold water line
Pipe clamp Pipe clamp
Shut off valve Shut off valve
DA68-03013A-03.indb 18 DA68-03013A-03.indb 18
3. Connect the water line installation kit to the shut
off valve.
Cold water line Cold water line
Pipe clamp Pipe clamp
Shut off valve Shut off valve
Connecting the water supply line to the
refrigerator.
There are several items that you need to purchase
to complete this connection.
You may fi nd these items sold as a kit at your local
hardware store.
For Copper Tubing
• ¼" copper tubing
• ¼" compression nut (1pc)
• Ferrule (2pc)
Compression Compression
Nut (1/4") Nut (1/4")
(Assembled) (Assembled)
Ferrule Ferrule
(Not supplied) (Not supplied)
Copper tubing Copper tubing
(Not supplied) (Not supplied)
Household water supply line Household water supply line
English - 18
Water line installation kit Water line installation kit
For Plastic Tubing
• ¼" plastic tubing
→ Molded end (Bulb)
• ¼" compression nut (1pc)
Refrigerator
Plastic Tubing Plastic Tubing
(Assembled) (Assembled)
Compression Compression
Fitting Fitting
(Assembled) (Assembled)
Molded end Molded end
(Bulb) (Bulb)
Compression Compression
nut (B) (1/4") nut (B) (1/4")
(Not supplied) (Not supplied)
Plastic tubing (B) Plastic tubing (B)
or or
(Not supplied) (Not supplied)
2014. 2. 25. 2014. 2. 25. 4:04 4:04