Panasonic DMP-BD80 Operating Instructions Manual page 11

Video Connections (TV)
e"HDMI Video Mode" and "HDMI Audio
Output" should be set to "On". (q 34)
eThe HDMI connection supports VIERA
Link "HDAVI Control" (q 28) when used
with a compatible Panasonic TV.
e This cable provides both Video and Audio
connections.
r .
-~ele-:i:~-"-I
i
~
__
~I
HDMIIN
e
Connecting to your TV, via HDMI AV OUT
For audio output, refer to pages 12 and 13.
Il
C
b:e--J
r=1=1
==I====;~-
HDMIAV OUT
Back of the unit
Television
Back of the unit
e
Connecting to your TV, via COMPONENT VIDEO OUT
COMPONENT
VIDEO IN
~/
m
Compo"," V;,,,
"b.
---:I~~'
I~R
eConnect terminals of the same color.
eSet the "Black Level Control" to "Darker".
(q 32)
eUsing the COMPONENT VIDEO OUT
terminal, while playing DVD-Video, the
video output resolution is limited to
"480p".
e Be sure your TV supports at least 480p.
Set "Component Video Resolution" to
"480p", "720p" or "1080i". (q 34)
elf this unit is connected to an amplifier/
receiver, etc. via an HDMI cable with
"HDMI Video Mode" set to "On" (q 34),
the video will be fixed to 480i.
el~D80-'
Set "High Clarity Sound" on the
on-screen menu to "Off' (q 31).
(Otherwise, the video will not be outpuL)
e Connect terminals of the same color.
e-Bollo".: Set "High Clarity Sound" on the
on-screen menu to "Off" (q 31).
(Otherwise, the video will not be output.)
VIDEO IN
AudiolVideo cable (included)
Television
o
Back of the unit
e
Connecting to your TV, via VIDEO OUT
_. I
( 111)
' - - - L -
- - - - - - l . ~ ~
RQT9378