Inserting Or Removing A Media; Basic Play (Playing Video Contents) - Panasonic DMP-BD80 Operating Instructions Manual

Inserting or removing a media
( ( Inserting or
re~:v~~g_~:i~~H_-
)
! ;
3 4l J!
'*
44 t
<
I
Basic play (Playing video contents)
Instructions for operations are generally described using the remote
control in these operating instructions.
mID:
lEtoSQ.]
only
Preparation
Turn on the television and select the appropriate video input on the television.
POWER
@---+-o
)
)
)
,Jt
13,>,_ .5¥
1)
TI
o - lilt
e.g.,
"
14
p
+ ;
l4
i
DRIVE
' I '
~,
~~-~
I
~~~:.
/
/'~--
\
lil~'
l \
!~\\?J \,~ ~)
ISU;MENU
~~//
I
~!
I
o
Press
[~
POWER] to turn on the unit.
e
Insert the media (¢ left).
Play starts.
elf play does not start, press
[~
] (PLAY).
elf a media with data in different file formats is
inserted, the file selection menu is displayed.
Press ["', T] to select the desired file format and press [OK].
elf the menu is displayed, press ["', T, .... ,
~]
to select the item and
press [OK].
elf the screen prompting you to use the color buttons appears,
continue to operate with the color buttons on the remote control.
eDISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [_] when you finish to preserve the unit's motor
and your television screen.
e The producers of the disc can control how discs are played. So you
may not always be able to control playas described in these
operating instructions. Read the disc's instructions carefully.
e When playing a set of two or more BD-Video discs, the menu
screen may continue to display even if the disc has been ejected.
l
rST.-.oPl. I
'"-~
Press [DRIVE SELECT] to select "BD/DVD/CD", "SD card" or "USB
device".
elf a media is inserted while the unit is stopped, the drive switches
automatically depending on the inserted media.
The Pop-up menu is a special feature available with some BD-Video
discs. This menu may vary with discs. For the operating method,
refer to the instructions for the disc.
1) Press [POP-UP MENU].
2) Press ["', T, .... ,
~]
to select the item and press [OK].
ePop-up menu also appears by pressing [SUB MENU] and selecting
"Pop-up Menu".
ePress [POP-UP MENU] to exit the screen.
( To switch drives
. A
* ) Q
1mB r.mmJ
mam
I:mD
mID
Press [TOP MENU/DIRECT NAVIGATOR].
( To show Pop-up menu 1mB
; M
;;a;zw: ;
as
& ~
_J e: _
$
( To display menus
.(, ' , L L L
~
Insert the card's label up, positioning the cut off corner to the right.
o
Pull to flip down the front panel.
e
Insert the SD card into the SD card slot.
e Press on the center of the card until it clicks into place.
Removing the SO card
Press on the center of the card and pull it straight out.
eWhen the card indicator ("SD") on the unit's display is flashing, the
card is being read from or written to. Do not turn off the unit or
remove the card. Such action may result in malfunction or loss of
the card's contents.
o
Press [~ OPEN/CLOSE] to open the disc tray.
e
Insert or remove the disc
ePress [~ OPEN/CLOSE] again to close the disc tray.
eDVD-RAM: Remove discs from their cartridges before use.
elnsert double-sided discs so the label for the side you want to play
is facing up.
Inserting a USB device
e Before inserting any USB device into this unit, ensure that the data
stored therein has been backed up.
eCheck the orientation of the USB connector and insert it straight in.
eSome USB devices inserted into this unit may cause this unit to
stop operating. Such USB devices cannot be used on this unit.
o
Pull to flip down the front panel.
e
Insert the USB device into the USB port.
Removing the USB device
Complete all USB device-related operations and pull the USB device
straight out.
eWhen the USB device indicator is flashing, the USB device is being
read from. Do not turn off the unit or remove the USB device. Such
action may result in malfunction or loss of the USB device's
contents.
( Insertin,g..or
re".:~.v~~gka~,
SO, card, • , )
Inserting an SO card
( Inserting or removing a USB device
- '"&SA b & LJSf. &M§!4).iklHBJ tJ % - L _JJ _;::;;p
jt
'E- R