Panasonic DMP-BD80 Operating Instructions Manual page 29

Easy control only with VIERA remote control
-
.
If you connect this unit to the TV that supports "HOAVI Control 2" or later with an HOMI cable, you can enjoy using more convenient functions.
You can operate this unit using buttons on the TV remote control
The buttons that you can use for this unit vary depending on the TV. For details, refer to the operating instructions of the TV.
Use the remote control supplied with this unit if you cannot operate this unit using buttons on the TV remote control
• The operation of this unit may be interrupted when you press incompatible buttons on the TV remote control
By using the TV remote control, you can play discs using the "Control Panel" and display the Top Menu (for BO-Video
and OVO-Video) or Pop-up Menu (for BO-Video).
e.g.,
e.g.,
o
Press the button for VIERA Link on the remote control.
e
Select the player.
-The FUNCTIONS menu is displayed.
o
Press [SUB MENU].
-This can also be displayed by using the VIERA menu screen.
-You cannot use the sub menu while the Top Menu for SO-Video or
OVO-Video is displayed.
e
Select an item, then press [OK].
By using the TV remote control you can play media using the FUNCTIONS menu.
Control Panel Control Panel is displayed. Follow the indications on the screen.
Screen Aspect
(~ 20)
Top Menu
mDIaamJEmD
Top menu is displayed.
Menu
EmD
Menu is displayed.
Pop-up Menu
mDI
Pop-up menu is displayed.
Rotate Right
mm
Rotate the still picture.
Rotate Left
Imm
Zoom inlmm
Enlarge or reduce the still picture
Zoom outlmm
When you want to leave the TV on and set only this unit to standby mode
Press
[6
POWER] on this unit's remote control and set to standby mode.
When not using "HDAVI Control"
Set "VIERA Link" in the Setup menu to "Off'
(~
34)
29
!
RQT9378