Panasonic DMP-BD80 Operating Instructions Manual page 9

Regarding 24p output
1mB
~~~ ~
-
- --
--
Many SD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second in accordance with the display formal.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS
eConnect to a TV supporting 1080/24p input via an HDMI cable.
NECESSARY SETIINGS
e"24p Output" "On" (0:> 34)
Necessary settings for audio output
- -
---
---
- - -
.
~_. ~
-
~----
After connecting to the terminals, perform necessary settings.
1) While stopped
Press [SETUP].
2) Press [ , "Y] to select "Audio" and press [OK].
3) Press [
, "Y] to select "Digital Audio Output" and press [OK).
4) Press [ , "Y] to select "Dolby D/Dolby D +/Dolby TrueHD", "DTSIDTS-HD",
or "SD-Video Secondary Audio" and press [ ... , ~
1
to select the option
1) While stopped
Press [SETUP].
2) Press [ , "Y] to select "TV / Device Connection" and press [OK].
3) Press [
, "Y] to select "Analog Audio Output" and press [OK).
4) Press [A, "Y] to select the option and press [OK].
5) Press [OK].
eThe channel setting screen is displayed. (0:> 37)
~diO-·-,
-----3'"'
! Dynamic Range
Compression
1
; DigItal Audio Output . :
rpCM
Down Conversion _
~~
!
t
DownmlX -
I
r="~
. " "
~
!!.A.~
eFor more information about settings, refer to page 33, 34, 37.
e When using the different terminal at the same time, the sound may not be output with the desired audio if the setting is incorrect.
In the following case, set "HOM I Audio Output" to "Off". (0:> 34)
-cB~: When connecting a compatible amplifier/receiver using 7.1 ch AUDIO OUT/5.1 ch AUDIO OUT terminals, and connecting a compatible
television using HDMI AV OUT terminal
-[~i:)~!l)
When connecting a compatible amplifier/receiver using both 7.1 ch AUDIO OUT/5.1 ch AUDIO OUT terminals and HOM I AV OUT
terminal if outputting the audio from analog terminals
-When connecting a compatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting a compatible television using HDMI AV
OUT terminal
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].
\1
9
_
..... :,. ...
.
_-
ROT9378