Panasonic DMP-BD80 Operating Instructions Manual page 35

To select these options, perform steps
0-0
(9 32)
"Network"
: : : : : : : : - : : : : : : : : : : : : - : : : : : : : : _ - - : : : : : : : : - : : : : : : : : - - l
-On -Off
Default Gateway
Subnet Mask
- - - - - -
- - -
- - -
DNS Auto Configuration (DHCP)
-On -Off
Primary DNS - - - . - - - . - - -
- - -
Secondary DNS
- - - .
-
-
-.
-
-
-.
- - -
Auto Detect Connection Speed
-On
-Off
Connection Speed Setting
-10BASE Half Duplex -10BASE Full Duplex
This is enabled only when "Auto Detect Connection Speed" is -100BASE Half Duplex -100BASE Full Duplex
turned "Off".
Proxy Server Settings (~ 18)
- Press [OK] to show the following settings.
Reset to factory preset
-Yes -No
Proxy Address
(The initial selling is blank.)
Proxy Port Number
(The initial setting is "0".)
Connection Test
- - - -
Network Service (~ 27) (VIERA CAST)
-Press [OK] to show the following settings.
Network Lock
-On -Off
You can restrict using VIERA CAST.
Changing settings (When "On" is selected)
- Follow the on-screen instructions. Enter a 4-digit password with -Change Password
the numbered buttons when the password screen is shown. It
will be the common password for "DVD-Video Ratings",
"BD-Video Ratings" and "Network Lock".
eOo not forget your password.
Audio Auto Gain Control
-On -Off
Volume that is different depending on the contents is adjusted
automatically to the standard volume while using the VIERA
CAST.
- Depending on contents, this function effect will not work.
-Select "Off' when the audio is warped.
Reduce to Screen Size
-On -Off
The screen is displayed reduced so the displayed screen of the
content does not get truncated.
Time Zone -GMT -12 to +12
By selecting the time zone, it is possible to set the unit's time to
(The initial setting is "-1".)
match your location.
GMT -5 = EST (Eastern Standard Time), GMT -6 = CST (Central Standard Time)
-Some VIERA CAST contents require the time zone to be set.
GMT -7 = MST (Mountain Standard Time), GMT -8 = PST (Pacific Standard Time)
Set the time zone if necessary. GMT -9 = AKST (Alaska Standard Time), GMT -10 = HST (Hawaii Standard Time)
DST -On -Off
Select "On" when using Daylight Saving time.
MAC Address (~ 17)
Displays the "MAC Address" of this unit.
i
IP Address/DNS Settings (~ 17)
I-
Press [OK] to show the following settings,
I,
~o;~:;:~sn
:::; Configuration (DHCP)
IP Address
"Others"
Off Timer
-2 Hours -6 Hours
-Off
Select how long the unit remains on when it is not being used.
Remote Control Code
(~
36) -Set Code 1 -Set Code 2 -Set Code 3
Quick Start
-On:
Speed of startup from power off is increased.
-Off:
-When the setting of "Stand-by power save" is enabled on
Internal control unit will be powered when it is set to "On", so contents of the
the TV that supports HDAVI Control 4, it will take longer to
following will be different from the time it is set to "Off'
startup this unit when the power supply of the TV is on
-Idle power consumption will increase. (about the power consumption
~
45)
standby mode even if the "Quick Start" is set to "On",
- The cooling fan may turn slowly to prevent overheating of internal parts.
Easy Setting
-Yes -No
You can execute basic settings ("On-screen Language", "TV
Aspect", "Analog Audio Output"
B080,
"Quick Start").
(Continued on the next page)
35/
1
-
ROT9378