Operation; Switching On And Off - Leica DISTO D330 User Manual

D
Measuring with the tripod (
The reference must be appropriately adjusted in
EN
order to be able to take correct measurements with
F
a tripod. To do this select
I You can switch the reference on the tripod on or off.
The setting can be seen on the display
E
P
Beep (
NL
You can switch the beep on or off.
DK
S
Level in status field (
N The level (in °) in status field can be switched on or
off.
FIN
Reset - returning the instrument to
J
the factory settings (
CN
The instrument has a RESET function. When you
ROK
select the menu function RESET and confirm, the
instrument defaults to the factory settings.
PL
A reset returns the following values to their factory
H
settings:
RUS
• Reference (rear)
• Display illumination (ON)
CZ
• Beep (ON)
• Unit (m(mm))

Operation

ON in this menu item.
)
)
• Stack and memory are erased
)
All customised settings and stored values are
also lost.
Operation
.

Switching on and off

Switches on the instrument and laser. The
display shows the battery symbol until the
next button is pressed.
Pressing this button for longer switches
the instrument off.
)
The instrument switches off automatically
after six minutes of inactivity.
CLEAR button
The last action is cancelled. While making
area or volume measurements, each single measure-
ment can be deleted and remeasured in series.
10
Leica DISTO™ D330 776176 en