D
Start-up
EN
Inserting/replacing batteries
F
I
E
P
NL
DK
S
N
FIN
J
CN
1
Remove battery compartment lid and attach
ROK
handstrap.
2
Insert batteries, observing correct polarity.
PL
3
Close the battery compartment again. Replace
the batteries when the symbol
H
nently in the display.
RUS
Only use alkaline or rechargeable batteries.
CZ
Remove the batteries before any long period
of non-use to avoid the danger of corrosion.
Start-up
Changing the reference point
(multifunctional endpiece)
The instrument can be adapted for the following
measuring situations:
•
For measurements from an edge, fold out the
positioning bracket until it locks in place at a 90
degree angle.
•
For measurements from a corner, open the posi-
tioning bracket until it locks in place, then push
flashes perma-
the positioning bracket lightly to the right to fold
it out fully.
A built-in sensor automatically detects the orienta-
tion of the positioning bracket and adjusts the zero
point of the instrument accordingly.
6
Leica DISTO™ D330 776176 en