Lan And Wan Port Addresses; Information From Your Isp - Telkom ADSL 5102G Instruction Manual

3.3 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are
shown below.
IP address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs

3.4 Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider)
what kind of service is provided such as PPPoE, PPPoA, and RFC1483.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
PPPoA
RFC1483 Bridged
RFC1483 Routed
LAN Port
10.0.0.2
255.255.255.0
Enabled
100 IP addresses continuing from
10.0.0.100 through 10.0.0.199
VPI/VCI, VC-based/LLC-based multiplexing, Username, Password,
Service Name, and Domain Name System (DNS) IP address (it can be
automatically assigned by your ISP when you connect or be set manually).
VPI/VCI, VC-based/LLC-based multiplexing, Username, Password, and
Domain Name System (DNS) IP address (it can be automatically assigned
by your ISP when you connect or be set manually).
VPI/VCI, VC-based/LLC-based multiplexing to use Bridged Mode.
VPI/VCI, VC-based/LLC-based multiplexing, IP address, Subnet mask,
Gateway address, and Domain Name System (DNS) IP address (it is fixed
IP address).
WAN Port
The PPPoE function is
enabled and setup by
default using Telkom's
ADSL guest account to
automatically get the
WAN port configuration
from the ISP, but you
have to set the
username and
password first.
16