Factory Default Settings - Telkom ADSL 5102G Instruction Manual

3.2 Factory Default Settings

Before configuring your router, you need to know the following default settings.
Web Interface:
Username: admin
Password: admin
LAN Device IP Settings:
IP Address: 10.0.0.2
Subnet Mask: 255.255.255.0
ISP setting in WAN site:
PPPoE
DHCP server:
DHCP server is enabled.
Start IP Address: 10.0.0.100
IP pool counts: 100
3.2.1 Username and Password
The default username and password are "admin" and "admin" respectively.
If you ever forget the password to log in, you may press the RESET
button up to 6 seconds to restore the factory default settings.
Attention
Attention
15