Table of Contents
Advertisement
DTV 720 User's Manual
Program
Status Screen
Press the ENT key to view the second-level program status screens.
Press the
Press the
Press the ESC key to go to the Home Screen.
Second-level screens
2nd-level Program Status Screen
where XXXXX is the program number at input, AAAAAAA is the service
descriptor for the program, YYY is Yes or No, indicating whether or not the
program is multiplexed into the output stream, and BBBBBBB is the avail-
able audio on the input for the program (AC-3, MPEG, or MPG/AC3).
Press the
may be viewed but only programs 1 through 16 may be selected for output).
Press the ESC key to return to the Program Status screen.
Front Panel
After a period of inactivity, some information on the LCD is replaced with help
Timeout
information on how to use the front-panel controls. This timeout period
Screen
(elapsed time between the last front-panel activity and presentation of help
information) may be changed using the Front Panel Timeout screen. For users
familiar with front-panel operation, selecting No Timeout will prevent the
help information from appearing. Other users may wish to set the timeout
period from 3 to 60 seconds.
Press the ENT key and then the
message timeout. Values of 3, 5, 10, 30, or 60 seconds, or No Timeout
may be selected.
Press the ENT key to confirm the selection or ESC to cancel changes.
Press the
Press the
Press the ESC key to go to the Home Screen.
wegener.com
Program Status...
key to go to Front Panel Timeout.
key to go to Input Setup.
ProgIn XXXXX AAAAAAA
Out: YYY
BBBBBBB
key to view the status of the next program (all programs present
Front Panel Timeout
10
key to go to IP Setup.
key to go to Program Status.
33
or
key to select the front-panel help
800043-01 Rev. B
Advertisement
Table of Contents
