Outdoor Unit - Sanyo SAP-CMRV1424EH Technical & Service Manual

2-3. Outdoor Unit

AVOID:
G
heat sources, exhaust fans, etc. (Fig. 5a)
G
damp, humid or uneven locations.
DO:
G
position the outdoor unit in a protected location
where snow will not blow into it.
G choose a place as cool as possible.
G
choose a place that is well ventilated.
G
allow enough room around the unit for air intake/
exhaust and possible maintenance. (Fig. 5b)
G
provide a solid base (level concrete pad, concrete
block, 10 × 40 cm beams or equal), a minimum of
10 cm above ground level to reduce humidity and
protect the unit against possible water damage and
decreased service life. (Fig. 5c)
G Install cushion rubber under unit's feet to reduce
vibration and noise. (Fig. 5d)
G use lug bolts or equal to bolt down unit, reducing
vibration and noise.
G
Install in a location where no antenna of a television
or radio exists within 3 meters.
NO
Hot air
Outdoor unit
Air intake
Min. 10 cm
Min.
Air discharge
5 cm
Fig. 5b
Air intake
Concrete
or equal
6
Exhaust fan
Heat source
Fig. 5a
Obstacle above
Min.
2 m
Valve
side
Min.
25 cm
Min.
40 cm
Ground
Anchor bolts
(4 pcs.)
Min. 10 cm
Fig. 5c
Cushion rubber
Fig. 5d
Min.
2 m