Tempo Fitness 610E User Manual page 10

A S SE MB LY ST E P 
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Remove PRE-ATTACHED BOLT & WASHERS from CONSOLE MAST.
B) Slide LOWER HANDLEBARS onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED SET SCREWS.
C) Slide UPPER HANDLEBARS onto LOWER HANDLEBARS. Secure UPPER HANDLEBARS to LOWER HANDLEBARS
using PRE-ATTACHED SET SCREWS.
10
WAVY WASHER
After handlebars are assembled they will rotate freely – be cautious. Until the
machine is fully assembled, do not grab the handlebars for support.
UPPER HANDLEBAR
PRE-ATTACHED SET SCREWS
PRE-ATTACHED BOLTS AND WASHERS
LOWER HANDLEBAR