Other Functions; Changing The Sound Settings; Adjusting The Sound Characteristics - Bali Fad/Sub; Customizing The Equalizer Curve - Sony CDX-GT320 Operating Instructions Manual

Other functions
" • • 1
III.IIBI'"" I . ,
x:
l
~ ~
l
~
Adjusting the sound
charalcteristics - BAUFAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press the select button repeatedly
untUi "BAL," "FAD" or "SUB" appears.
The item changes as follows:
LO\f\I*1 ---+ MID*1 ---+ HI*1 ---+
BAL (left-right)
--+
FAD (front-rear) ---+
SUB (subwoofer volume)*2 ---+ AUX*3
*
1 VVhen EQ3 is activated (page 9).
*2 VVhen the audio output is set to "SUB" (page 9).
"ATT" is displayed at the lowest setting, and can
be adjusted up to 21 steps.
*3 VVhen AUX source is activated (page 10).
2
Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Custc)mizing the equalizer curve
-EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a sourc4e, then press (
EQ3)
repeatedly to select "CUSTOM."
2
Press the select button repeatedly
until "LOW," "MID" or "HI" appears.
3
Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
fro nl -10 dB to + 10 dB.
Example: CDX··GT320/GT32W
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example "ON" or
"OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
"e" indicates the default settings.
CLOCK-ADJ (Clock Adjust) (page 5)
BEEP •
To set "BEEP-ON"
(e)
or "BEEP-OFF."
AUX-A*1 (AUX Audio)
To turn the AUX source display "AUX-A-ON"
(e)
or "AUX-A-OFF" (page 10).
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off,
- "A.OFF-NO"
(e),
"A.OFF-30S (Seconds),"
"A.OFF-30M (Minutes)" or "A.OFF-60M
(Minutes)."
SUB/REAR*1
To switch the audio output.
- "SUB-OUT"
(e):
to output to a subwoofer.
- "REAR-OUT": to output to a power amplifier.
DEMO (Demonstration)
To set "DEMO-ON"
(e)
or "DEMO-OFF."
DIM (Dimmer)
To change the brightness of the display.
- "DIM-ON": to dim the display.
- "DIM-OFF"
(e):
to deactivate the dimmer.
M.DSPL (Motion Display)
To select the Motion Display mode.
CDX-GT320/GT32W
- "M.DSPL-SA"
(e):
to show moving patterns
and spectrum analyzer.
- "M.DSPL-OFF": to deactivate the Motion
Display.
CDX-GT220/GT22W/GT120/GT12W
- "M.DSPL-ON"
(e):
to show moving patterns.
- "M.DSPL-OFF": to deactivate Motion
Display.
continue to next page---+
9