Sony CDX-GT320 Operating Instructions Manual page 7

[Q]
DSPl (display)/SCRl (scroll) button
(CDX-GT320/GT32W/GT220/GT22W)
page
8
To change display items (press); scroll the
display item (press and hold).
DSPl (display) button (CDX-GT1201
GT-12W) page
B
To change display items.
[1]
SEEK -1+ buttons
CD::
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forvvard a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
[j1]
MODE button
page
8
To select the radio band (FM/AM)*.
~
BTIVl/CAT butte.n (CDX-GT320/GT32W)
pagle 8
To start the BTM function (press and hold).
BTIVI button (CDX-GT220/GT22WI
GT'120/GT12W)
page
8
To start the BTM function (press and hold).
lHJ
RESET button
(located behind the front
panel)
(CDX-GT320/GT32W only)
pa~le
5
!1§]
NUlmber buttons
CD:
(D/®: AlBMI-I+
(during MP3IWMA
playback)
(CDX··GT320/GT32W/GT2201
GT:22W)
To skip albums (press); skip albums
continuously (press and hold).
®:
REP
pagE~
8
CD:
SHUF
pa~~e
8
@:PAUSE
To pause playback of a CD on this unit.
To cancel, press again.
Radio:
To receive stored stations (press); store
stations (press and hold).
II§]
Receptor for the card remote
cornmander (CDX-GT320/GT32WI
GT:220/GT22W only)
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 5) (CDX-GT320/GT32W only).
m..
(~)/" (~)
buttons
To control CD/radio, the same as
(SEEK)
-/+ on the unit.
Setup, sound setting, etc., can be operated by
..
...
1m
DSPl (display) button
To change display items.
IE
VOL (volume) +1- button
To adjust volume.
P1!]
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
m
SEl (select) button
The same as the select button on the unit.
PE
t
(+)/~
(-) buttons
To control CD, the same as (D/® (ALBM
-/+) on the unit.
Setup, sound setting, etc., can be operated by
t~.
PE
SCRl (scroll) button
To scroll the display item.
HI]
Number buttons
To receive stored stations (press); store
stations (press and hold).
*
In the case of
a
CDIMD changer or SAT tuner being
connected; when (
sou
RCE)
is pressed, the
connected device ("MD," 'XM" or "SR'') will appear in
the display, depending on which device is
connected. Furthermore, if (
MODE)
is pressed, you
can switch the changer, or SAT tuner band (CDX-
GT320IGT32Wonly).
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (
SOURCE)
on the unit is pressed, or
a
disc is
inserted to activate the unit first.