Names Of The Parts - Dimplex GDC-AC9RW Instructions For Use Manual

NAMES OF THE PARTS

1. Tack switch
2. Display screen
3. Adjustable air vent
4. Joint tube
5. Exhaust tube
6. Drain hose
7. Cool inlet
8. Cool Air filter
9. Hot inlet
10. Drain pipe
11. Hot air filter
4
TACK SWITCH & DESCRIPTION OF FUNCTION
1. POWER KEY
Press to turn unit "ON" or "OFF".
2. FUNCTION
Press this key to select refrigeration, heat or dehumidification.
( heating function just for model number
GDC-AC12RCW)
3. TEMPERATURE REGULATION KEY (UP)
This key raises the preset temperature by 1℃ each time it is pressed to a maximum of 30℃
4. TEMPERATURE REGULATION KEY (DOWN)
This key lowers the preset temperature by 1℃ each time it is pressed to a minimum of 15
℃ or 17℃( For GDC-AC9RW/GDC-AC12RW/GDC-AC12RB, the minimum is 15℃, for
GDC-AC9RCS/GDC-AC9RCW/GDC-AC12RCB/GDC-AC12RCW, the minimum is 17℃
※
In normal conditions, the temperature data which appears on the panel is the ambient
temperature, not the temperature which is set by the user. When the user has adjusted
and set the temperature to his requirement, the data on the panel will return to the
ambient temperature 5 seconds later.
The ambient temperature will descend or change according to the temperature which is
set by the user, but the temperature descendant time and speed will depend on the
environment and space where the model is.
For example, if the ambient temperature is too hot or the room is too large, the speed for the
temperature descent is absolutely slow, and the cooling efficiency will be poor as well.
GDC-AC9RCS/ GDC-AC9RCW/ GDC-AC12RCB/
5
)