Names Of The Parts; Push Button Switches/Functions - Dimplex GDC9RWA Instructions For Use Manual

NAMES OF THE PARTS

1. Push button switch
2. Display screen
3. Adjustable air vent
4. Window kit adaptor
5. Exhaust tube
6. Drain hose ( cooling &heating
model only)
7. Cool inlet
8. Cool air filter
9. Hot inlet
10. Drain plug
11. Hot air filter
Note: make sure drain plug is fitted before use. ( 10 )
PUSH BUTTON SWITCHES & DESCRIPTION OF FUNCTION
1. POWER KEY
Press to turn unit "ON" or "OFF".
2. FUNCTION
Press this key to select refrigeration, heat or dehumidification.
(Heating function is only available in the following models:
GDC14RCWA / GDC14RCBA)
3. TEMPERATURE REGULATION KEY (UP)
This key raises the preset temperature by 1℃ each time it is pressed to a maximum of 30℃
4. TEMPERATURE REGULATION KEY (DOWN)
This key lowers the preset temperature by 1℃ each time it is pressed to a minimum of 17℃.
※
In normal conditions, the temperature data which appears on the panel is the ambient
temperature, not the temperature which is set by the user. When the user has adjusted
and set the temperature to desired level, the data on the panel will return to the ambient
temperature 5 seconds later.
The ambient temperature will descend or change according to the temperature which is
set by the user, but the temperature descendant time and speed will depend on the
environment and space where it operates.
For example, if the ambient temperature is too hot or the room is too large, the rate at
which the temperature descends will be slow, and the cooling efficiency will be poor as
well.
GDC12RCWA / GDC12RCBA /