Table of Contents
Advertisement
remove the battery.
Dispose of old battery promptly and properly.
When POWER LED blinks, replace the battery.
USING EARPHONES
You can connect a pair of stereo earphones (not supplied) to the
detector so you can listen to it privately. Using earphones also
saves battery power and makes it easier to identify subtle changes
in the sounds you hear, for better detection results.
To connect earphones to the detector, insert the earphones' 6.3mm
plug into the EAR jack on the control housing.
Note: The detector's internal speaker disconnects when you
connect earphones.
To protect your hearing, follow these guidelines when you use
earphones.
Set the volume to the lowest setting before you begin
listening.
comfortable level.
Do not listen at extremely high volume levels. Extended high
volume listening can lead to permanent hearing loss.
Do not wear earphones while operating your detector near
high-traffic areas.
OPERATION
Your Metal Detector distinguishes between ferrous and nonferrous
metals. Ferrous metals contain iron, while non-ferrous metals
After you begin listening, adjust the volume to a
6
Advertisement
Table of Contents
