Table of Contents
Advertisement
Access control; Parental
control (DVD-Video only)
Movies on DVD discs may contain scenes, which is not
suitable for children. Therefore some discs contain
'Parental Control' information that applies to the
complete disc or to certain scenes on the disc. These
scenes are rated from 1 to 8 and alternative, more
suitable scenes are available on the disc. The function
ratings are country-dependent.
Activating/Deactivating Parental Control
Access Control
1
In Stop mode, select
Features menu s using the w/v (down/up) keys
and press u (right cursor).
Access control
Status wi n dow
Low power standby
Sound mode
Di s pl a y
PBC
2
Enter your 4-digit PIN code. (You might have to
enter it twice to confirm.)
Parental Level
3
Move to
keys.
4
Move to the Value Adjustment bar using the u (right
cursor) key.
5
Set the rating using the w/v (down/up) keys or the
numeric keys0-9 on the remote control to select a
rating from 1 to 8 for the inserted disc.
Rating 0 (displayed as '– –'):
Parental Control is not activated. The Disc will be played
without any protection.
Ratings 1 (child safe) to 8 (adults only):
The disc contains scenes not suitable for children. If you
set a rating for the player, all scenes with the same
rating or lower will be played. Higher-rated scenes will
not be played unless an alternative is available on the
disc. The alternative must have the same rating or a
lower one. If no suitable alternative is found, play will
stop and the 4-digit code must be entered.
in the
enter code
using the w/v (down/up)
Access control
Status wi n dow
Low power standby
Sound mode
Di s pl a y
PBC
6
Press OK or t (left cursor) to confirm and press t
(left cursor) again to exit from the menu.
Change country
Access Control
1
In Stop mode, select
Features menu s using the w/v (down/up) keys
and press u (right cursor).
2
Enter your 4-digit Pin code.
Change Country
3
Move to
4
Press the u (right) key.
5
Select a country using w/v (down/up cursor).
6
Press OK or t (left cursor) to confirm and press t
(left cursor) again to exit from the menu.
Changing the 4-digit code
Access Control
1
In Stop mode, select
Features menu s using the w/v (down/up) keys
and press u (right cursor).
2
Enter the old code.
Change Code
3
Move to
4
Press the u (right) key.
5
Enter the new 4-digit PIN code.
6
Enter the code a second time and reconfirm with OK.
7
Press t (left cursor) to exit from the menu.
IMPORTANT :
If you forgot your code, press 9 STOP four times while in
the access control PIN code box and exit with OK. Access
control is now switched off. You can then enter a new code
(twice) as described above.
Chi l d l o ck
Parental l e vel
Change country
Change code
in the
using the w (down) key.
in the
using the w (down) key.
25
Advertisement
Table of Contents
