Regza-L1Nk Input Source Selection; Volume And Mute Controls Of Audio Receiver; Other Regza-Unk Functions - Toshiba 40RV52R Owner's Manual

Item
Power
Top Menu
Description
Turns the select device on and off.
Accesses the top menu of a DVD.
Other REGZA-LiNK functions
When the
Enable REGZA-L1NK
and each item in the
REGZA-L1NK Setup
menu are set to
On,
the following
functions will be enabled.
Menu
Contents
Menu
Accesses the menu of a DVD.
Accesses the contents list when you press
8.
At this time, the
REGZA-L1NK Player Control
menu will disappear.
Item
TV Auto
Input Switch
Description
If a connected HDMI device starts playing
video or audio, the TV will automatically
switch to the appropriate HDMI input.
Note. When you turn on the Audio Receiver; change its input
source, or adjust the sound volume, the sound will be output
from the audio receiver's speakers even if TV Speakers has
been selected. Turn the TV off and on again to output the
sound from the TV speakers.
To set the REGZA-LINK Setup:
1
From the
Setup
menu, highlight
REGZA-L1NK Setup
and
press
8.
2
Press. or
~
to highlight
Enable REGZA·L1NK.
3
Press
~
or
~
to select
On.
Note. If you select Enable REGIA·LlNK Off, the other items
will be grayed out.
4
Press. or
~
to highlight the
REGZA-L1NK Setup
item
you want to use, and press
~
or
~
to select
On
or desired
mode.
• TV Auto Input Switch: On/Otf
• TV Auto Power: On/Off
• Device Auto Standby: On/Off
5
To save the new settings, highlight
Done
and press
8.
To revert to the factory defaults, highlight
Reset
and
press
8.
Note.·
• These functions depend on the devices that are connected.
• The
REGZA-L1NK Player Control
item will be grayed out in
the following conditions:
- A non-HOMI input is currently selected.
- The Enable REGIA·LlNK item is set to Off.
- The connected CEC device is not
a
playback or
recording device.
REGZA-LiNK input source selection
If a REGZA-L1NK device with HDMI switching capability
(e.g. Audio Receiver) is connected to the HDMI input, you
can select another REGZA-L1NK device that is connected to
the master HDMI device using the TV's INPUT button. See
page 33 for details.
VOLUME and MUTE controls of Audio
Receiver
With your TV's remote control, you can adjust or mute the
sound volume of the Audio Receiver. First, set the MODE
SELECT switch on the remote control to
TV.
•r.t:1
~
adjust the volume level.
• MOE
turns off the sound.
Note.
• To use this function.·
- Set Speaker Preference to Audio Receiver in the
REGZA-LiNK Setup menu.
- Confirm that a connected REGZA-LiNK device (such as
OVO player, etc) is selected for the Audio Receiver input
source.
• You can also use this function when the audio receiver is
connected to the TV's DIGITAL AUDIO OUT terminal (not
HOMI connection). In this case, select a digital audio input
mode on the Aua'io Receiver.
• These functions depend on the device connected.
TV Auto Power
Device Auto
Standby
Speaker
Preference
If a device is turned on, the TV turns on
automaticall y.
If the TV is turned off the TV will send
a message to turn off all of the devices
connected to the TV.
From this item, you can set your audio
output preference to the TV speakers or the
audio receiver speakers. When this item is
set to Audio Receiver, the TV remote can
be used to adjust or mute the volume of the
audio. This item will be grayed out unless
a REGZA-L1NK compatible audio receiver
is connected.