Toshiba 40RV52R Owner's Manual page 63

HDTV Quick Set-Up Guide
(For US customers)
,
Congratulations on the purchase of your new Toshiba High.Definition Television. You must get HD Signal to get an HD Picture!
Getting HDTV is as easy as 1,2 or 3.
There are 3 basic ways to receive an HDTV Signal on your new High-Definition TV.
Over-The- Air (Antenna)
2
CABLE
3
SATELLITE
Connect a high quality outside
antenna (not supplied) directly
to the antenna input on the
TV.
(Reception cannot be guaranteed
and is based on proximity to
local signal)
Cable Customers will need to
subscribe to High-Definition
Digital Cable from your local
provider. (Additional monthly
subscription cost may apply)
Satellite Customers will need a
High-Definition satellite receiver
and appropriate dish hardware.
(Additional monthly subscription
cost may apply)
Additional HDTV Antenna Reference Information can be obtained from
www.antennaweb.org
Digital Cable or Digital Satellite is not HOTV. The picture quality is superior to standard analog cable, but it is not HOTV! See the difference HO
Programming makes!
4
Component Video Input
ColorStream e HO Component may also be used to
receive HOTV
Use if no HOMI'" or OVI Jack is available.
There are 3 jacks color-coded with Red-Green-Blue on
the back of the TV and HO Cable Box or HO Satellite
Receiver.
This connection will require a separate analog audio
connection. (use the red and white audio connections)
OVI to HOM!"
Your HO Cable Box or HO Satellite Receiver may have
a OVI connection. This will be connected to the HOMI'"
jack on the TV using an HOMI'" cable and an HOMI'" to
DVI converter.
DVI carries digital video only. Therefore, this will require
a separate analog audio connection as well. (use the red
and white audio connections)
3
HOMI'" is
the
best connection for
HDTv.
This is a digital connection that
carries both digital video and
digital audio.
To connect directly from an
antenna or basic cable.
Connect the cable direcdy
to the antenna input on the
back of the Tv.
I
Antenna Input
Once you have a High-Definition Signal you need to connect it to a High-Definition Input on your TV.
If you are connecting directly from an antenna or basic cable.
!
If y.u are using an HD Cable Box or HD Satellite Box, there are 3 standard connections that can be used to receive an HD signal.
2
HOM!" to HOM!"
INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT INPUT
"IV Cable box
I
Satellite box "IV Cable box
I
Satellite box "IV
Cable box I Satellite box
"IV
HOm! HOm!
DIll
R AUDIO l
HOm!
AUDIO
AUDIO AUDIO
R l Y P s P I I R L V "" ""
~
• 0
•
• 0 ••• .0•••
"
t~
t
HUt
t~,n
Now that you have HD Programming and are connected to an HD Input. Tune to an HD Channel (Remember not all channels are currendy broadcast in HD) Sit back. relax and enjoy the superior quality of High-Definition.
Note: Standard analog TV channels and HD channels. even on the some network. broadcast on different channels. Example: ABC analog may be on channel 4, while A8C-HD may be on channel 104,
If you are experiencing problems please call Toshiba Customer Service at 1-800·631-381 I
All cables and Adapters are sold separately.
For additional Toshiba Productlnlormation visit www.tacp.com. Please remember to complete your producl regislration. Failure to register your product does not dlsmlnlsh
your
warranty rights.
TOSHIBA
l . . dlng Innoll.tlon»)