Setup/Lnstallation Menu Layout; Navigating The Menu System - Toshiba 40RV52R Owner's Manual

Setup/Installation menu layout
The Installation menu contains the Terrestrial and System Status menus.
To open the
Installation
menu (illustrated below), press
MOU
on the remote control or TV control panel, open the
Setup
menu,
select
Installation,
and press
@.
Icori
Terrestrial
System Status
CL
Item
Input Configuration
Channel Program
Channel Add/Delete
Channel Tuning Mode
Time Zone
Signal Meter
System Information
Option
[Opens the Input Configuration menu]
[Start] - [Scans for new channels on
ANT/CABLE]
[Opens the Channel Add/Delete menu]
Standard/Auto/Digital
- Pacific/Alaska/Hawaii/AtianticlNewfoundlandlEastern/Centrall
Mountain
[Opens the Signal Meter menu]
- [Opens the System Information screen]
Navigating the menu system
You can use the buttons on the remote control or TV control
panel to access and navigate your TV's on-screen menu
system.
• Press
MOU
to open the menu system.
• When a menu is open, use the up/down/left/right arrow
buttons (... ......... ) on the remote control or TV control
panel to move in the corresponding direction in the menu.
• Press
@
to save your menu settings or select a highlighted
item. (A highlighted menu item appears in a different color
in the menu.)
• All menus close automatically if you do not make a
selection within 60 seconds, except the signal meter menu,
which closes automatically after about 5 minutes.
• To close a menu instantly, press
Ecr
Note:
• The menu background may sometimes appear black,
depending on the signal the TV is receiving. This is not a
sign of malfunction.
• The Video sub-menu appears with a black background,
which looks different from other menus.