Target Tones - Minelab X-Terra 705 Instruction Manual

38
tones

Target Tones

The number of Target Tones may be selected
from the Tones menu. There are five different
options listed in the table below.
1 Tone
2 Tones
130Hz
3 Tones
130Hz
4 Tones
130Hz
Multiple Tones
Pitch can vary during target detection in the 130Hz-950Hz range. The
pitch depends on the Target ID that is determined during the detection.
Threshold Tone
In Prospecting Mode, the pitch of the
Threshold Tone can be adjusted using the
Tones menu. This is a personal preference
and will vary depending on the type of
headphones being used. The Threshold pitch
ranges from 140Hz to 1010Hz.
The frequency/pitch of the Threshold
tone for the Coin & Treasure Mode is
set to 230Hz and cannot be changed.
Press Menu/Select and choose
Tones
.
Use the + and – to select either 1, 2, 3, 4, or
Multiple Target Tones (99).
Press Pinpoint/Detect to return to
detection.
450Hz
700Hz
450Hz 700Hz
450Hz 700Hz 950Hz
Press Menu/Select
and choose
Tones .
Use the + and – buttons to select a
Threshold Tone (1–30).
Press Pinpoint/Detect
to return to
detection.
Adjusting Target Tones in Coin & Treasure Mode
Adjusting Threshold Tone in prospecting Mode
39
adjusting tones