Minelab X-Terra 705 Instruction Manual page 14

24
choosing a discrimination pattern
pattern
Discrimination
In Coin & Treasure Mode
use Patterns to
toggle between
Pattern 1, Pattern 2,
Pattern 3 and Pattern 4.
Iron Mask
Discrimination
In Prospecting Mode
+ –
use
and to
adjust the Iron Mask
Discrimination scale.
When the Iron Mask Level is set to 0,
the detector behaves the same as in
All Metal Pattern.
All Metal Shortcut
The Preset Discrimination Patterns may be
edited to create custom patterns.
The X-Terra 705 has
an All Metal shortcut
Method 1 – to reject a specific
available in both modes.
Target ID using an actual target
In Coin & Treasure Mode,
When a target is detected a discrimination
press All Metal to
segment will flash, indicating its position on
toggle between the
the discrimination scale, and the target's ID
selected Pattern and
number will appear on the LCD.
All Metal.
Press Accept/Reject
Target ID.
The discrimination segment and
appear to indicate that the detected ID is now
rejected.
Check that the Target ID has been rejected
by detecting again. There should be no audio
response (blanking) from that target
(Detector Audio, p.
Method 2 – to reject a specific
Target ID using + or –
Use
In Prospecting Mode,
Target ID you want to modify. The flashing
press All Metal to
segment and the Target ID number will
toggle between Iron
indicate the selected ID.
Mask and All Metal.
Press Accept/Reject
reject that ID. The discriminated segment and
the
and the
The All Metal Pattern
cannot be edited.
editing a discrimination pattern
to reject that
icon will
17).
+ –
and to scroll through and select the
to either accept or
icon will appear if rejected. The segment
icon will disappear if accepted.
Accept/Reject toggles between
accepting and rejecting targets.
25