Table of Contents
Advertisement
ATTACHMENTS FOR BATTERY DRILL SYSTEM 4-807
Overview of attachments:
Order number
Description:
1.) 22/4415-00
Long rechargeable battery with extension for Battery Drill System 22/4400-00 increased power output
2.) 22/4416-00
Standard rechargeable battery
3.) 22/4417-00
Funnel for inserting Rechargeable Battery 22/4415-00 or 22/4416-00 into Battery Drill System 22/4400-00 (to avoid
contamination
of the Battery Drill System. If it is not used, there may be a loss of sterility)
4.) 22/4413-00
Desktop Charger, mono 240V and 115V: charging time 60 minutes (Please state required voltage when
22/4414-00
ordering)
Desktop Charger, dual 240V and 115V: charging time 60 minutes (Please state required voltage when
5.) 22/4411-00
22/4412-00
ordering)
Three-jaw chuck, 0.5 mm to 7.0 mm capacity for round and triangular shanks, incl. chuck key
6.) 22/4534-00
7.) 22/4450-00
Reduction gears with AO standard clutch, large. Speed 0-150 rpm
8.) 22/4550-00
Oscillating saw with AO connection for saw blades
9.) 22/4455-00
Sternum saw
10.) 22/4535-00
Quick-action chuck for Kirschner wires, dia. 0.5 to 3.0 mm
Protection & guidance sleeve for Kirschner wires (screws onto Battery Drill System 22/4400-00 )
11.) 22/4540-00
12.) 22/4536-00
Chuck for AO and Aesculap attachments, Standard small
13.) 22/4537-00
Chuck for DIN attachments (Aesculap medullary reamer)
14.) 22/4538-00
Harris chuck
15.) 22/4539-00
Hudson chuck
( GB )
9
Advertisement
Table of Contents
