Table of Contents
Advertisement
OVERVIEW:
1. Battery Drill
2. Battery Compartment
3. Rechargeable Battery
4. End cap
5. Chuck with Drill Bit
6. Clockwise Rotation
7. Main switch and reverse Rotation
Important
To obtain full power from the drill during the surgical operation, always use freshly charged batteries.
Preparation
Step 1. Open the end cap (4) by turning in the direction indicated by the arrow
Step 2. Insert the rechargeable battery (3) into the battery compartment (2) in the direction shown by the arrow, at an angle of not
more than 10° to 15°. (insert gently to avoid damaging the contacts)
Step 3. Replace the end cap (4) and close it by turning in the direction indicated by the arrow
Step 4. Test the drill to ensure it operates properly (see "Method of operation" and "Functional check" on page 2.)
6. Clockwise rotation
7. Main switch and reverse rotation
1
R
L
2
3
4
7
Advertisement
Table of Contents
